IQOS ILUMA i Standard REMIX Limited Edition from Terea UAE Store<\/strong> while current stock is available.<\/p>\n
\nHow to Use IQOS ILUMA i Standard REMIX Limited Edition<\/h2>\nStep 1: Charge the Device<\/h3>\n
Ensure that both the Pocket Charger and Holder have sufficient battery power.<\/p>\n
Keep the Holder inside the Pocket Charger when charging is required.<\/p>\n
Step 2: Remove the Holder<\/h3>\n
Take the REMIX Holder from its Pocket Charger.<\/p>\n
Step 3: Insert a TEREA SMARTCORE Stick<\/h3>\n
Insert one compatible TEREA SMARTCORE STICK carefully into the Holder.<\/p>\n
Do not force the stick.<\/p>\n
Step 4: Allow AutoStart to Begin<\/h3>\n
After correct insertion, AutoStart can initiate preheating automatically. AutoStart is one of the confirmed REMIX smart functions.<\/p>\n
Step 5: Check the Touch Screen<\/h3>\n
The Touch Screen provides status information while the Holder prepares for use.<\/p>\n
Step 6: Begin the Experience<\/h3>\n
Once the Holder indicates that it is ready, begin normal use.<\/p>\n
In Performance Mode, supported experiences can last up to approximately six minutes.<\/p>\n
Step 7: Use Pause Mode if Needed<\/h3>\n
During an eligible experience, swipe down across the Touch Screen.<\/p>\n
Pause Mode can temporarily stop the experience for up to eight minutes.<\/p>\n
Step 8: Resume<\/h3>\n
Swipe upward across the Touch Screen and allow the Holder to prepare again before continuing.<\/p>\n
Step 9: FlexPuff May Activate<\/h3>\n
When supported by the individual usage pattern and operating conditions, FlexPuff may extend the experience.<\/p>\n
Step 10: Remove the Used Stick<\/h3>\n
Carefully remove the TEREA SMARTCORE STICK after the experience finishes.<\/p>\n
Step 11: Return the Holder to the Pocket Charger<\/h3>\n
Place the Holder back in the Pocket Charger whenever additional charging is required.<\/p>\n
\nHow to Use FlexBattery<\/h2>\nPerformance Mode<\/h3>\n
Performance Mode is the default setting.<\/p>\n
It provides either:<\/p>\n